This page was last updated on September 06, 2016.

---

---

---

---

---

---

---

---

When Mind wishes to express a Thought, a 2D pattern (a negative) is prepared and suitable dimensioned. In order to bring that image to life (into the 3D) it must be imbued with motion. Why motion ? Because our sensing has been designed to interact with motion. Before we begin the construction of a cubic container, consider the following important premise. Mind is omnipresent, there can be nothing else in existence. However, to our sensing, Mind appears to divide as follows. (fig : 1) The red aspect is generated between the -ve central plane and the red boundary plane while the blue aspect is generated between the -ve central plane and the blue boundary plane TIP : To avoid any confusion concerning simultaneous versus sequential motion, we must apply a rule to fig : 1. The cubic structure of fig : 1 is actually showing sequential motion simultaneously, and this is the root cause of confusion for students. Once motion begins everything changes because motion imparts a dynamic movement to the image. Nothing stay still long enough to be recognised as solid structure ! Motion begins in the top hemisphere the is repeated in the lower hemisphere in sequential cycles, forever. Fig : 1 shows the 2D plane edge on and also that Mind is partially divided by assigning the top side a red and the bottom side as blue. (This is only a conceptual idea because a red/blue divide can ONLY come into manifest as a result of curvature and can not exist on a plane of zero curvature). This 2D plane may be considered as possessing 4 poles. An E/W pair to dimension the width of the plane and a second E/W pair to dimension the depth (receding into the distance) of the same plane. The distance between them is minimal. When the distance between the red/blue is maximum, a cubic structure will result. The 3D physical moving expression is effectively mapped out first as a 2D red and blue negative, so that the positive red aspect can be projected in one direction while the blue positive aspect can be projected in the opposite (180°) direction. This is a dimensionless plane because it has no (N/S) 3D character at all. Projection has not yet begun, because division has not yet happened. Electricity is the FIRST force which appears within the 3D physical. ALL EXPRESSION is therefore electric, and dimensioned electrically. The inert gas expression is best described as this edge on almost 2D flat geometry. This is why hydrogen and helium are so abundant in outer space. These gases represent the seed conditions from which most of our perceived matter unfold or germinate. One Mind begins to Think, electricity is born. Electricity is the force which drives the red/blue faces away from one another in opposite directions. Mind always remains STILL and remains anchored to the center of the wavefield. Mind will act as the still fulcrum for any induced motion. Once electricity comes into being, N/S (red/blue) polarity is born. Notice how the process of Thinking has produced two anode expressions centered by one single (Mind) cathode plane. Don't hold this flat boundary cubic geometry too strongly at the moment ! When the electric force goes to work the area when the image will form acquires a curved geometry. This curvature is necessary in a two-way universe, whereby there is a compressing effect in one direction but an expansive effect through the SAME curve in the opposite. (fig : 1a) Curvature is positive (RED) on the surface with the shorter arc, and negative (BLUE) on the side with the longer arc The effect is present regardless of which hemisphere the curvature is expressed This is Natural Law for ALL curvature This is a two-way universe Polarity is CAUSED by curvature This curvature may be likened to the geometry uncovered by DLaP's bowl shaped magnetic field emitters This curved geometry is responsible for all the effects within the 3D physical universe we sense and believe to be real. Our sense are deceived. Notice, how the image projected from the zero equatorial plane get refracted in towards the central axis. The greater the curvature the greater this refraction. Pay really close attention to the implications of curvature regarding the manifestation of red/blue character. Notice how in fig : 1a blue character is present outside the red in the top hemisphere. Notice also, how red character is inside the blue in the bottom hemisphere. This red/blue divide comes in being BECAUSE of curvature, and this differential must be applied to ALL expressions of curvature. Now, this electric force which is projected in the N/S direction has surrounding it loops of invisible force. These loops are the manifestation within the physical 3D that Mind is Thinking although these loops are invisible to our sensing ! This is a design feature. Fig : 1a can now be modified to indicate this process. (fig : 1b) The SAME effect is evident in each hemisphere The ACTUAL geometry is the exact reverse of  DLaP's bowl shaped magnetic field emitters Fig : 1b indicates the curvature expression as loops of force which surround the central N/S axis. These loops manifest the electric effect. In man's circuitry he assigns the loops which appear about his current carrying wire as magnetic loops. The loops are not magnetic, nor do they appear as a result of the current. These loops CAUSE the appearance of current in the wire. Tesla knew that there was no current IN the wire, but circled the wire in these loops. They are NOT magnetic loops of force. TIP : Don't think of fig : 1b as a division of one light into a red spectrum above and a blue spectrum below the dividing equator. This concept of division only applies BEFORE any actual division occurs. Once division is present, curvature is present. Once curvature is present, red AND blue character are present in the top hemisphere either side of the curved potential plane. Likewise, the curvature below the dividing equator ensures red AND blue character are present in the lower hemisphere, as implied in fig : 1a. In the case of an oscillating wave (string) this red/blue is first evident above the dividing equator then in the next half of the cycle the red/blue character is expressed below the dividing equator plane as indicated on the right side. Cold is always on the outside in order to freeze the hot to the inside. This is what hold matter in place NOT gravity. The diameter of the loops are large at the cathode base indicating a slow orbital motion. But bodies in this orbit will have a high axial (N/S) axial rotation ! The diameter of the loops at the anode apex indicate a very fast orbital revolution. Bodies in these orbits will consequently have a slow axial (N/S) rotation. Any loop in motion will experience a gyroscopic effect and so the projections indicated in fig : 1b must account for this phenomenon. The slower the motion within the loop the more flat and horizontal will be the image. This will translate as cold, dark nebulous space. The faster the motion within the loops the more vertical the image will be, manifesting as hot, incandescent, dense matter. These varying speeds of revolution between the slower cathode base and the faster anode apex will induce the classic wave geometry. (fig : 1c) Two anodes, one common cathode Maximum extension away from the cathode plane is achieved in 4 stages Carbon unfolds from helium via Li, Be, B and finally C Li is teenage carbon Ancient knowledge of nature is evident in the Sanskrit symbol of light Fig : 1c also indicates the gyroscopic plane angle as motion within the loops of force increases. The next really important concept to grasp is that STRAIGHT cubic boundaries planes don't just happen, they are exposed by the way opposed motion from neighbouring wavefields interact. WR describes STRAIGHT plane as planes of ZERO CURVATURE. This means that at these planes there is no electricity, no motion, no polarity and thus no imaged expression. The entire universe of motion manifests to our sensing inside one Master-Cube. WR also refers to the cube as the wave field. The cubic wave field is made up of 9 mirrored planes, 3 internal planes and 6 boundary planes. The 3 internal planes are used to project images out into the wave field, while the boundary planes are used to reflect images back towards their origin. (fig : 2) Before we continue to develop the cubic geometry and the motion contained therein, consider the following, The first great lesson WRC can teach a student is the true nature of Cause, and not allow too much credence be given to sensed (effect) experiences. Motion is the unnatural state of our perceived universe. Stillness, and your relationship to that Stillness is your first lesson ! (fig : 3) (fig : 3a) This is the undivided Concept The 2D pattern from which the 3D will unfold The qualities and properties here are dimensionless Fig : 3a is the best representation of the True Reality, True Cause. An omnipresent Mind. Expression of this Mind can therefore spring from apparent 'nothingness' at any point in the perceived universe. This image represents the infinite possibility that can be prepared as the 2D negative prior to projection of those properties into the physical universe. The wave cycle is the journey of expression from that apparent 'nothingness' out into a seeming 'somethingness' and the return from that sensed expression back to motion-in-inertia or Stillness. (Although NOT in the reverse direction). Fig : 3 implies that as Mind expresses Thinking, an apparent division is created by projection one half of the Idea/Concept in one direction with the second portion of that same Idea/Concept in the opposite direction. This is how electricity comes in manifest. It is the force which pushes these two aspects apart. This creates the perception that there is a red upper hemisphere and a blue lower hemisphere. This is NOT correct. The properties and character you assume belongs to the lower 'blue' hemisphere actually belong to the longer arc of a curved plane. Curved planes are common to both hemispheres. All spheres are formed as the result of the unification of two opposed Hazely Hemispheres... (fig : 4) This is NOT a wiring schematic, nor is it a physical structure ! This geometry is not simply a half a toroid. This geometrical pattern traces out the loops of force necessary to generate spheres. When you decide to bake a cake, a physical body (cake) is created in the image of the thought in your mind. The thought itself, never leaves the metaphysical/spiritual universe, your spiritual SELF. The negative NEVER become physical. The physical body simulates the negative Idea. A wavefield might be one, but it is comprised of eight. (fig : 3c) Corner/center duality (fig : 3d) Figs : 3c/d indicate what matter appears to have particle and wave properties. When motion is examined with respect to its relationship to the cubic hub center, then it appears to possess particle character. However, when that same expression of matter is reviewed with respect to the corner of the 8 sub-cubes then it appears to possess wave like properties. The body can thus be described as being located at both conditions (center and corner) at once ! Can you 'see' the red body is positioned in sub-section 8 of sub-cube 1 ? That same red body is also positioned in sub-section 7 of sub-cube 2, in sub-section 5 of sub-cube 4, in sub-section 6 of sub-cube 3, in sub-section 5 of sub-cube 4, in sub-section 2 of sub-cube 7, in sub-section 1 of sub-cube 8, in sub-section 3 of sub-cube 6, and in sub-section 4 of sub-cube 5.   This will give you an idea of some of the sub-dimensions (18 in total) at play to create a sphere. It is important to complete some additional research in order to understand how standing waves are generated, and how an echo is reproduced as a copy of the original body ! TIP : Don't confuse the curvature indicated in fig : 1a with the apparent opposite curvature represented in fig : 3b. They each represent entirely different concepts and each is valid in their own right. Fig : 1a represents invisible properties, while fig : 3b indicates a physical manifestation of that invisible curvature. The boundary planes of zero curvature are formed as follows, (fig : 3e) Two-way opposed (motion) EQUAL pressure fronts If you consider the inflation of wavefield with electrical force as the internal pressure then, a plane of zero curvature is created when opposed pressures fronts equalise one another at their common intervening plane. TIP : Don't think all straight plane of simply as a condition of ZERO/NO polarity, rather think of it as BALANCED polarity. Sodium and Chlorine unite in a balanced way to create a cubic straight walled (salt) structure. All other crystalline structures are a result of a non-balanced geometry about the common equator. Wave fronts of different frequencies will pass through one another. Sex-mates will oppose one another with equal balanced wave front frequencies and dimensions. This mechanism will be applied later to the internal structure of bar-magnets. WR teaches that the 3 internal projection planes are formed as follows. (fig : 7) Each sub-cube (1 to 8) is imbued with an electrical pressure potential. Mind will continue to inflate these sub-cubes until they are appropriately filled to reproduce the intended idea. As inflation reaches a critical volume, the outer surfaces of the 8 spheres push against one another, flattening along the plane between them. When the sub-cubes are fully inflated, the potential is compressed into the 3 internal planes and the 6 external boundary planes. This is how matter appear to emerge from a seeming nothingness. Images are formed within the large cube, by the interactions of the 8 inner sub-cubes. If we now think of the introduction of the electric force into the wavefield as a inflation/deflation cycle, then 3D character unfolds as the wavefield inflates through an inhalation of this electrical potential. This generative process we perceive as a living, vitalising motion. As this potential is allowed to collapse or is exhaled, then the projected image returns to its Source. To die means to lose N/S character and thus the image returns to the 2D plane. (It does NOT fall backwards) (fig : 5) Can you now 'see' that by the process of Mind Thinking, Mind breaths into the wavefield, vitalising it. The electrical pressure holds the expression away from the zero wave axis. When Mind relaxes from Thinking, the wavefield deflates and returns that potential to Source through exhalation. ALL motion is CAUSED by Mind giving CPR to Thought-bodies. Your physical SELF is a DIRECT product of a Mind Thought. (fig : 3b) Although the motion of a standing wave appears as a simple up/down oscillation, the actual progression is very complex Fig : 3b represents the result of Mind infusing a wavefield with vitalising electrical potential. The wavefield is breathing. Mind cannot be separated from its own Creation. The curvature indicated in fig : 3b seems at odds with some of the images above. This however, is not the case. Within the physical universe, an oscillating pattern is established between two fixed nodes. Curved wavefield on the other hand operate with fixed nodes because those nodes need to be free to distort to form rings about the N/S axis. One can imagine the 2D flower of life pattern dimensioned in Mind manifesting as a 3D sphere when set into motion. (fig : 3f) The positive apex and the negative apex are the SAME point Fig : 3f is a redraft of fig : 3b to include the invisible lines of curvature as well as the visible effects namely, the appearance of vibrating matter within the perceivable universe. In a vibrating string the lines of curvature do indeed turn inside out as they transition from the upper hemisphere to the lower hemisphere, but they do not reverse their effect. Instead they become the other. Red compression above becomes blue expansion below. Remember also, lines of curvature join regions of the SAME electric potential. This is one of the roles of E/W polar control. Many students attempt to unite a red light hemisphere with a blue light hemisphere, a N-pole with a S-pole so to speak. WR himself is not sufficiently clear on this point, but this is how and why two identical anodes manifest as a result of turning inside out across the equatorial divide.

---

---