Electricity & Magnetism
This page was last updated on September 22, 2016
This page is dedicated to Dean Bonkovich
|
Reluctance = the resistance within a magnetic circuit, usually an iron core. Nature will always take the path of least resistance.
The terms 'magnetic', 'magnetism', and 'magnetic circuit' are used from a conventional perspective and are not used in a way to support a SEPARATE force of magnetism.
MSS = main stream science, the conventional perspective of science
TBP = the Thunderbolts Project, promoters of the electric universe (EU)
LOF = loops of force which are, MIND PRESENT within the physical universe
Gravity = undivided Stillness. It is a direction not a force. Stillness centers (hub) all motion. Motion implies loop motion
Divided gravity = a polarised condition, a +ve/-ve. A Metaphysical Concept appears as two polar aspects within the physical
CRT = cathode ray tube. The properties discovered by man apply to all Physical Creation. The expanse of space acts as a CRT
NT = The genius that is Nikola Tesla
It goes without saying...that if we live in an electric rather than a gravitational universe, then this section is quite important in our overall understanding of Creation and how the simulated illusion is manifested.
Our first task in preparing to receive the following information is to discard almost everything we have learned in school regarding electricity and magnetism. What was taught were observations and interpretations of the senses, and many mistakes were made!!!
We need to set some new ground rules!!
TIP:
Electricity is NOT what man, MSS, nor the TBP believe it to be !
There is no current within a 'current' carrying wire.There no free electrons in a wire or wave guide to produce electric current. There is no separate force of magnetism.
Man cannot be electrocuted with current.
He is harmed by motion, motion in the surrounding loops NOT electrons in a wire.
|
Man has learned to design and work within a very inefficient system believing that this is the only electricity available.
Consideration # 1
Man v Nature
Man creates his electro-magnetic devices by wrapping wire around a symmetrical cylindrical core. The resultant effects produce a uniform expression of polarity. This is because man wraps his wires with a uniform diameter. The newly created N/S poles seems equally strong and each pole can pick up equally sized mass. Nature does not work this way.
Nature creates her polarised conditions in cones rather than cylinders and thereby introduces an asymmetrical distribution of potential (N/S) which behave in a non-uniform fashion. In short, Nature creates her loops of force with varying diameters. The compressed apex of the N poles (anodes) can now pick up a large mass, while the expanded cone base (S-pole, cathode) can only pick up that same mass but only if it is divided into a powder.
 Another way to say this is, that high density expressions will thus accumulate towards Nature's anodes apices while the low density, gaseous expressions (divided mass) will accumulate towards the cathode base. There is a two-way desire to flow, and that desire depends on whether those bodies are primarily centripetally compressing or centrifugally expanding. The Earth's core acts as our planets anode while the upper atmosphere acts as the planets cathode. This creates an electro-potential density differential which is the same for all of Nature's anodes/cathodes. It is this potential density difference which is the cause of all curvature to motion or bending of light. Motion will thus bend inwards (centripetally) approaching anodes and bend outwards (centrifugally) approaching cathodes. What may look like a gravitational effect is entirely electrical in nature. WR is clear, that we live in a two-way universe. This implies that there is a desire to centripetally compress as we migrate from the cathode base to the anode apex. However, there is also a desire to centrifugally expand as migration occurs in the opposite direction. This two-way universe is necessary to act as a resistive force to any one particular direction. This implies a 'particle' or charged body of a particular mass may be electrically suspended between the anode/cathode by these opposed forces fighting one another for supremacy !
(Notice, how Mind appears to be divided)
There is no forces of magnetism or gravity in Nature.
Magnetism and gravity seem to exist !
They are effects, whose cause is electricity.
There is only one type of electricity.
Electric current does not flow in a wire, motion is expressed in loops around the wire - skin effect.
Those loops surrounding a current carrying wire are Mind Thought-Loops !
Those spinning loops create the illusion of current running in the wire.
Polarity acts like a distillation column separating matter according
to their individual electric condition. Centripetal/compressing motion
migrates towards the anode, while centrifugal/expanding motion migrates
towards the cathode.
Mind appears to be divided because there is an outside rim Mind pushing inwards with centripetal motion AND there is a central hub Mind which is resisting that inward push by centrifugally pushing back from the hub to the rim. It appears as though Mind is fighting with itself. But, in doing so a stable central hole/orifice is maintained at the center of the loop.
Pay close attention to any shift of perception across a dividing plane !
|
(fig : 13)
Curvature is responsible for all the conditions to which our sensing respond. WR teaches that ALL curvature is polarised, the shorter inner arc being positive relative to the longer outer arc which is negative. This is also true for all nested spheres, as is evident by the atmosphere surrounding our planet.
Consideration # 2
Illusion v Reality
We live simultaneously as two expressions. A physical illusionary body, and a spiritual REAL body. We know little of the spiritual universe and thus believe our physical existence is the one only true reality. This physical expression of motion comes from our spiritual desire to express that motion. The spiritual is cause while the physical is effect - electrical effect.
Electricity is the force which extends out from the realm of non-motion into the realm of motion to create all the sensed and observed effects.
You can think of the electric force as a potential pressure. In fact, this is how MSS describes the dimension of voltage. However, WRC make it very clear, that it is the process Mind Thinking which imbues the expression by infusing it with a vitalising force. Mind essentially exhales a vitalising breath which all states of motion inhale. Motion with in the physical universe beings with this initial inhalation.
During the series of video presentations 'Walter Russell -CSI' it was shown how the Desire of Mind to express Idea generated this Idea as a patterned seed.
What will become the electric fields within the simulated universe are first encoded into the seed of the expression.
Fig : 1 represents a rotating loop of Mind Energy which codes every expression as a series of 4 rings (half an octave). This metaphysical seed is the pattern for ALL electric effect. The density of electrical potential at any point within this rotating loop of force depends on
While the seed lies dormant the spiral line density (section e1) connecting the rim to the hub express no stresses or tensions. Once this seed unfolds into the simulation the entire expression comes under tension as this flat 2D pattern is pushed out into a 3D expression.
This is exactly analogous to stretching elastic bands into a condition of tension.
The power of Mind to concentrate pushes these ringed condition out into the simulation.
The spiral loops in section e1 become taught
They want to spring back to their inert condition, but, the Desire of Mind to express Idea holds them under tension
preventing them from springing back !
Once Mind stops Thinking,
then the inherent tensions within matter will pull the expression/image back to the inert condition.
All matter wants to explode and return to the inert seed condition.
The one true reality is a dimensionless universe of non-motion in seed. This is the realm of Cosmic Mind.
This is the only 'thing' that exists. Fig : 1b is a representation of this seed universe of non-motion. In man's typical xyz graphical representations, this realm exists as the xyz axes themselves, while the simulated universe of motion appears between the axes.
(fig : 1b)
Stillness and non-motion are real while electrical effects which produce a physical universe of motion are illusionary.
|
Notice, that there are no dimensioned properties or characteristics like, time, motion, spin, temperature, or colour associated with this universe. Those dimensioned properties are the recording apparatus which define a particular state of motion within our perceived universe of motion. Our perceived universe is a moving COPY of a non-moving Idea. It is as if our perceived universe of motion is inductively coupled to the universe of Stillness and Mind. We cannot sense the transmission (Cause), but believe that the induced effect is all there is to know !
Mind Thinking in the universe of non-motion is then received by the loops of force within the perceived universe and the induced motion in those loops of force are recorded in properties like temperature, axial rotation, tone etc.
The overall Cosmic Idea represented in Fig : 1b never moves, never goes anywhere. It provides the backdrop onto/into which loops of force will be projected.
 (fig : 1c)
|  (fig : 1d)
|
In Fig : 1c, WR is illustrating how a loop of force is used to make a moving copy of the non-moving Mind Idea. Mind therefore centers all motion. Mind cannot be separated from the motion it thinks. Pay close attention to those spiral lines of force. This 2D spiral field pattern will BECOME the electric field lines when projected as a 3D moving image.
Think of fig : 1c as you might a sand on a vibrating cymatic plate. When Mind creates a complicated pattern, this will manifest in the physical as high frequency oscillations. Low density pattens will thus manifest as lower frequencies within the physical.
High frequency oscillations therefore appear to be the most dense and solid, while the lower oscillations will appear gaseous and nebulous. Matter therefore is a high frequency Thought pattern, while space is a low frequency Thought pattern.
Fig : 1d indicates that Mind never moves and always centers its own creation. When the central 'Mind hole' is large we perceive cold, dark space, but when the central 'Mind hole' is very small then we perceive density, heat, matter and form.
An important point about Fig : 1d is that we perceive the extremities of narrow shafts of Mind Stillness as a magnetic poles !
The only motion in our perceived universe lies within these loops of force which circulate the light units of Mind Thinking. There is no other motion at all, although there appears to be !
These loops do NOT require a wire before they appear. These loops are in fact, a precursor to the perception of current flow.
These loops of force precede the apparent current in the wire, they are the CAUSE of current in the wire. You do not get an electric shock from current in a wire you receive a shock from contacting the extremely fast motion circulating in the loops around the wire. In short, one can produce any effect within the physical by the correct manipulation of the motion in the surrounding loops of force.
(fig : 1e)
Fig : 1e is probably the next most important lesson to grasp after than of fig : 1c.
With these two images alone one can unlock much of WRC !
Man has never grasped the importance of loops of force believing them to be the wake of electric current
The motion of the Static expression is beyond our sensing, however, the motion of the dynamic COPY of this loop is very much within our sensing. It may be useful to think of these electric loops of force of the dynamic motion as being directly COUPLED to the loops of Mind Energy. It is the process of Mind Thinking that determines how much of the seed unfolds into a moving expression of itself !
The seed pattern remains within the axis of Mind, but the projected moving pattern circulates around this seed shaft.
Imagine one single loop of force as you might a two sided coin; heads and tails. When the coin rolls on its edge BOTH sides roll in the same direction. If you observe the rolling coin from one side only the head will be appears to roll ACW. But, if you now observe the same rolling coin from the opposite side you would say that the tails side is rolling CW !
If head (ACW) and tail (CW) motion rotate in the SAME direction then it follows the union must comprise a coming together of an ACW with a CW direction of motion !
This simple illustration highlights how our sensing is tricked into believing there is two types of motion. Whether you observe CW or ACW direction is entirely due to your perspective !
Direction is universal.
(fig : 1f)
ELECTRICITY is the force utilised by Mind to express the Universal Idea
Thinking Mind creates the illusion of division.
Once polarity/division is created LOOPS are created
Loops mean polarity and polarity means loops (no wires, no current)
Notice, Mind is outside all expression controlling that expression and,
Mind centers all expression located at the hub of spinning loops.
Spinning loops register Mind Thinking
Spinning loops are ELECTRIC and not magnetic
Loops appears when DIVISION occurs not when current flows.
The concepts represented in fig : 1f although not highlighted specifically is probably WR most IMPORTANT drawings !
Fig : 1f indicates the universal CRT within which the entire universe of motion and matter materialise. This model shows clearly that the physical universe is ENTIRELY electric and that the source of ALL those electric effects is the Creator Mind. MSS assigns a separate magnetic force to these loops of force which appear within the cathode ray tube when the voltage across the tube is sufficiently high.
Notice, Nature does not use wires, and the loops which appear DO NOT require a current nor a wire to manifest. Another very important point is that these loops precede any effects of current flowing in a physical wire.
MSS believes that the current running in a wire produces magnetic loops of force about that wire. This is the wrong interpretation.
We will examine the conditions necessary to 'see' these loops within a CRT and apply those conditions to outer space/cosmos.
This model will be developed further throughout the site, particularly the 'Coil_Design' page.
TIP :
The direction of N/S is the reference axis for all matter.
(fig : 1h)
NT has taught us the benefits of ac current. Its most important quality lies in it ability to transform voltage/current. WR also eludes to Natures desire to step-up potential during the generative half of the cycle. Likewise, a step-down transformer technique is used during the radiative half of the cycle.
This implies that ac is the current of choice when designing coils.
Consideration #3
Loops - Polarity - Current
The loops of force indicated in fig : 1f are the unseen patterns of Mind Thinking. These loop CREATE the physical illusion. They precede any apparent motion within the physical universe and are the CAUSE of the illusion of a current flow in the copper wire.
The only REAL motion lies within these loops of force.
This is why Tesla said electricity runs on the surface of the wire and NOT in the wire.
We know, that at low voltage pressures these loops are invisible. Depending on the experimental setup it may require about 20kV to 'see' the loops emerge from the darkness.
The creation of any polarised condition also SIMULTANEOUSLY creates loops of force. It is impossible to have a polarised condition WITHOUT the presence of loops. In fact we can say 'Loops and Polarity' are one.
When division/polarity occurs, the loops register that division. These loops are a DIRECT connection to Source. A physical polarised condition is a direct indication of Mind Thinking THAT condition !
When Mind Thinks, loops appear and those loops spiral CENTRIPETALLY about a still center.
Concentrative Thinking is required to maintain a polarised condition.
If polarisation is lost or Mind stops Thinking then centrifugal force will dominate
and the loop/image will expand rapidly to disappear at wavefield boundaries.
It is this centripetal motion which make the loops themselves visible to us. All the loops turn in the same direction.
When Mind concentrates further, this increases the voltage, and the loops become more dense, spinning faster on an inward centripetal path. This creates the effect of light, heat and density at the hub focal center of the loops themselves.
Increased voltage implies that centripetal motion is enhanced. We know from ohm's law that this will decrease the current !
When man increase his voltage pressure he unwittingly compresses these loops of force which in turn squeezes harder towards the focal center particularly at the anode. When Mind stops Thinking, or the polarised condition is short circuited then the loops rapidly expand (centrifugally) and the voltage drops with a corresponding spike in perceived current !
The loop disappears... in a flash !
Mind Thinks again and the loop appears once again albeit with slightly different dimensions. This will create the illusion to our sensing of motion within the loops. Mind Thinking switches the circuit (fig : 1f) on/off continuously. The loops centripetally compress then expand due to high internal pressure of the loop surrounded by a low pressure condition as Mind stops Thinking.
Every single expression with our physical universe is a polarised cell and behaves exactly as fig : 1f.
Each on/off pulse creates a breathing cycle for each call/expression.
As these loops of force breathe, they create a sequential sphincter type motion which creates the illusion of current flow in the wire. The loops of force create the current flow, NOT the other way around !
Our sensing is confused. We cannot 'see' the loops in motion. Those loops expose the still hub centers. This central stillness has no meaning for our sensing. The foundation of of creation is right there but, its significance is missed !
MSS believes that magnetic poles are located at the extremities of a bar-magnet. MSS don't consider exposed loops in motion about still centers in their theories.
Stillness like silence is omnipresent but fast loop motion about still shafts looks like gravity to the untrained eye. If spinning loops impart a vortex type motion from their rim extremities in towards a central focal hub, an effect which is less at the cathode but greater at the anode, then any matter (which is an electric expression) will experience an acceleration towards the anode.
'Free' electrons are not necessary.
TIP :
Remember, all expressions of matter are electrically conditioned. In order to express themselves within the physical there must be some degree of polarity present. Polarity implies electric conditioning.
Polarity means loops NOT just poles (as defined by MSS)
|
Consideration #4
CRT vs expanse of space
These properties will develop as more understanding unfolds. Our physical reality is an imaged illusion created by the motion imparted to loops of force. What impact does/should point 15 have in coil design ?
In short, which is more important controlling current/voltage in a wire, or producing loops in motion ? What does Nature do ?
For example, does one spinning loop act like a clutch plate to affect neighbouring loops to effectively step-up motion. Imagine a loop of large diameter (cathode) will revolve more slowly. Large diameter implies low voltage. Low voltage implies high current. High current implies high torque, High torque implies better ability to act like a clutch. This implies a step-up/down mechanism as voltage/current interchange as motion migrates between anode/cathode.
In fig : 9 if there is any interaction between loops within the same CRT then those interactions are face to face, like clutch plate.
At present we cannot eliminate that the interaction between CRT's may include external/internal rim interactions, more like gear sets or nuts on a threaded bar. It does seem however, that the observed structures in space tend to have more face/face alignment, as if reflected in a mirror plane.
If the process of Mind Thinking flips the polarity of the CRT very rapidly then, images of opposed cones one inside the other is feasible.
Fig : 9a attempts to complete the line between the metaphysical/spiritual universe and the physical expression. What is observed within the physical depends on the conditions developed with the CRT/wavefield. If the overall voltage is low we sense cold dark space. When the voltage is high light, density and matter seem to emerge from the darkness. When the voltage is off, that image may vanish instantly, or unwind slowly over millenia, but the basic principle remains unchanged - projected images.
The voltage is increased in 4 stages.
From the inert gas beginnings, a +1 voltage is only capable of filling about 33% of the CRT with rings. A +2 voltage will fill the CRT about 60%. A +3 voltage will extend the rings from the cathode to about 80% of the CRT. The carbon +4 voltage is sufficient to achieve maximum projection of rings towards the anode. This is a similar process to opening a telescope one section at a time.
|
Consideration #5
Loops are curved
Curvature implies polarity
We know that all curvature is polarised. WR assigns the positive compression condition to the inner arc, and the negative expansive condition (opposite direction) to the longer arc. When curvature is formed into a closed circle, a common focal hub emerges from the darkness. When the loop is acting like a lens then the degree of exposure/intensity at the central hub depends on the
diameter/ curvature of the loop/lens itself.
There is therefore a two-way effect,
If a curved plane is bent is the opposite direction then the SAME effect is projected in the opposite direction. The positive inner arc BECOMES the negative outer arc, and likewise the former outer negative arc BECOMES the new inner positive condition.
(fig : 9g)
Polarity is not simply expressed as the division between anode/cathode. All curvature is polarised. Both the anode/cathode are curved, this is why there is red/blue, positive/negative character on BOTH sides of the anode/cathode division.
The concept of a singly charged anything (particle) is not possible in this polarised and curved universe.
Another approach to understanding the dynamics within a loop of force is as follows.
Mind centers and surrounds without exception all expressions of motion. When the diameter (k) is large, matter desires to accumulate towards the cathode and thus manifests with nebulous character. When the diameter (k) is small, then the loop of force tends to prefer the anodic conditions so it will now manifest as hot dense matter.
Notice also the following,
IMPORTANT, as the annular walls (a/b) and (x/y) increase their individual diameters, they cause the diameter (k) to decrease. This is what WR means by Mind exhaling and breathing vitalising life INTO the rings. The annulus swells as a result, but this growth compresses the central hole (k) out towards the outside.
When the diameter (k) is very small the expression will 'behave' like a proton. But, when the very SAME potential is distributed over a larger area, diameter (k) is large, then the expression will tend to 'behave' more like an electron. Expression thus interchange continuously. What a particle seems to be depends solely on its internal diameter (k) and hence the strength of the focal point intensity at the hub. This in turn determines which half of the potential divide the 'particle' will be located or be en-route to.
|
Consideration #6
Centripetal motion >>> Centrifugal motion
Centrifugal motion >>> Centripetal motion
Centripetal motion give structure and form to motion. Matter become firm and structured due to the gyroscopic effect of loos in motion. Stability on a bicycle is achieved due to the gyroscopic motion of the wheels. This is Natural Law.
The generative centripetal motion has a quite different geometry to that of the radiative centrifugal motion. Consider fig : 2.
 (fig : 2)
In a spiral vortex, centripetal motion pushes inwards from the outside boundary in towards the central hub/axis. The radiative stream reacts in the opposite direction, but, is contained to an inside expression due to the dominant centripetal motion evident on the outside of the vortex. So, centripetal motion appears to dominate centrifugal motion.
Now, for the radiative half of the cycle, the centripetal motion is relaxed. The higher internal pressure has a chance to escape and will do so long before it has had a chance to run from the apex anode to the base cathode. Radiation is explosive. When the high voltage is removed from the CRT, the rings disappear beyond our sensing instantly.
High voltage, fast orbital revolution, slow axial rotation, low torque, low current must all be conditions associated with an anode.
Low voltage, slow orbital revolution, fast axial rotation, high torque, high current must be the properties of a cathodic condition.
 (fig : 2a)
There is not such a strong spiral geometry evident during the radiative half of the cycle as indicated in fig :2a because, there is outward E/W expansion at every level between the anode and the cathode and so the vortex expands outwards at all levels to disappear radially.
|
Mind is NEVER divided, it just appears to divide.
Fig : 2b attempts to show how a disturbance of Stillness appears to be created and how the ripple effect of that apparent division extends out (between the xyz axes/planes) to create a illusion of motion which our senses tell us is real, but, we now Know that a Thinking Mind creates that dynamic matrix.
(fig : 2b)
When it comes to extending this concept to the 3D, an oscillating ferrofluid would be a good model to develop
That disturbance expressed here as a disturbance along an x-axis, appears to have two opposed aspects.
- Compressed condition (sphere) at the peak apex and
- Expanded condition (space) close to the x-axis itself
The axis appears as if it were inflated from within. Inflated with vitalising Mind Thoughts. Motion thus appears to emerge out of a nothingness. There is only Mind, and as Mind is without dimension it is not registered by our sensing.
Electricity is the force utilised by Mind to express Thinking. Electricity appears as Mind Thinks and disappears as Mind relaxes. The universe thus, pulses and heaves in cyclic breathing/thinking motion. This is the only motion within the universe. Our sensing has been designed to interact with this motion, although our sensing knows nothing of the underlying CAUSE.
Assign approximately 50% of universal potential to compressed expressions of matter, and 50% of the potential to the expanded expression of space. Remember, the entire universe can manifest between the Master anode/cathode of the Master CRT/Wavefield.
Every aspect of Creation is balanced, although there is an apparent imbalance introduced by conical polarisation rather than cylindrical polarisation.
If the electric force holding these two conditions apart is removed, then the opposite aspects will collapse back together and meet in death at their mid-point. In death, neither the sphere nor space exist.
Electric pulsations are manifested when,
- the electric effect is ON, driving the poles apart from their central equilibrium fulcrum position
- then the current is removed (OFF), collapsing the polarised region back to the central fulcrum
- then the current is applied again (ON), this time the polarity is reversed
- finally, this current is removed and the poles collapse back to the fulcrum, the cycle is now ready to be repeated.
(fig : 3)
This image only indicates a simple extend/collapse model
Nature works in a continuous cycle and never reverses... this is explained on the 'Geometry' page
Gravity : The illusion of gravity is created because matter seems to accumulate at anodes. There is no force inside the anode pulling matter inwards. In fact, the complete opposite is true. All matter wants to explode. Gravity appears as focal point or shaft of electrical potential. Electrical potential is focused inwards towards a common center, due to centripetal inward motion and the curvature evident in every direction. The effect appears to be an attraction from within. Matter has no ability to attract or repel any other matter. It is this INTERNAL RESISTANCE to compression which is registered as heat. This heat is kept in place because centripetal force >>> centrifugal force. However, when the power to compress wanes, that INTERNAL PRESSURE will explode outwards as centrifugal motion. This is what WR means by the statement "every action contains its own reaction". As compression from the outside inwards increases, so to does the internal resistance. This resistive reaction cannot wait to explode and return all motion back to a state of non-motion. Think of gravity as a direction rather than a force. Gravity is in essence, the stillness about which motion rotates. The N/S axis forms a shaft of stillness and 'matter' in motion then rotates about this same shaft. Think of gravity as you do silence. It is omnipresent, and the same everywhere. Gravity, Stillness and Silence are the same thing.
ALL of Nature turns on the N/S axis from W to E
All planets, suns, and atoms roll on their equatorial rims - no exceptions !
Matter thus emerges from LOOPS OF FORCE !
Consideration #7
Attraction or Direction
If you board a plane to fly to a particular destination, you do so because, you, like the rest of the passengers, desire to reach that new location, not because you have any affinity for, or were attracted in (by), any other passenger.
You are all heading in the same direction
because you all have the same DESIRE !
The desire for a common destination by each passenger, creates the illusion of attraction between the passengers to each other.
This is another example of 'blue lights = FIRE !' as described above.
That common destination is the condition of Stillness. Waves carry matter to Stillness. If the access to that Stillness is in any way restricted, then it appears that the bunching of matter to get through that restriction is a force of attraction that lies WITHIN matter itself.
Centripetal lines of force contract and compress towards the apex of a cone, or the center of a gravity focal point. It is this compression that gives rise to the apparent restriction or constriction to the flow of matter.
Just as was indicated with the logs flowing in the river analogy, the logs appear to be drawn to one another when negotiating a restriction. Our senses cannot detect the medium which lifts and supports sensed matter in this simulation.
A demonstration by Prof. Eric Laithwaite
|
Consideration #8
Alternating Current
Relativity is to 4D, what PERSPECTIVE is to the 3D
WRC teaches that electric current does not flow IN wires, but flows in loops around the wire. An opinion also held by Nikola Tesla, and he should know.
Tesla was the champion of alternating current (ac). Science has taught us that the current flows in one direction for one half of the cycle and flows in the opposite direction during the second half of the cycle. This is not what is happening, it just appears that way, and WRC teaches how appearances can be deceiving. Examine the following images.
Fig : 10 shows the basic geometry of a loop of force which circulates about a current carrying wire. Notice, the direction is the SAME for both faces.
Fig : 10a indicates how the direction appears to be different for each side when each face is viewed head on. No change in direction has actually occurred.
The process of Mind Thinking alternates OUR PERSPECTIVE. We first observe an image as represented by fig : 10b, then from our fixed location we next observe the reverse image as indicated by fig : 10d. Our sensing is tricked into believing that there was a change in direction when no such change occurred.
Based on this belief, man designs his electric devices with an alternating current flow. This by its very nature implies that there is a flow of something (free electrons !!!!) in one direction for one half of the cycle and then a flow of free electron in the opposite direction during the second half of the cycle.
Nature does not do this, she induces a spin, which alternates our observed perspective ! How ?
She set the (spiritual) loops in motion as described in fig : 10 but the effect within the physical is for matter to align so that it can spin on a perpendicular axis as indicated in fig : 10e
There appears to be simultaneous CW/ACW from the SAME perspective.
Are wires and ac current really necessary for man to harness Nature ?
|
I am convinced that Tesla knew the geometry of natures loops of force which inspired him to create the counterintuitive
'Tesla Turbine' design.
 |
Tesla was perhaps mimicking the loops of force surrounding a current carrying wire, knowing full well, they act like clutches. His disk stacks do exactly the same thing, gripping the fluid in a counterintuitive way, expelling that fluid perpendicular to the input. His mechanical pump is based on his electrical understanding of Nature.
The process of Mind Thinking creates a flickering image. First we observe from the anode, then observe the same image from the cathode.Our sensing responds to that flickering image. Just as the rapidly changing images of a movie creates the illusion of motion, the flickering images of nature creates the illusion of solidity and form which fool our sensing.
The flickering image also produce the illusion of motion and flow where no such motion exists !
(Spatial loops of force)
We know that loops of force circulate about a current carrying wire. Without the cardboard present, these loops are effectively circulating in the open air and will thus be called spatial loops. Air is not a good conductor (high magnetic reluctance) of these loops although a complete circuit is established about the wire. These loops have therefore certain measurable (speed, reluctance ) properties which tell the story of the loops ability to circulate in this spatial path. Man assigns the separate force of magnetism to these loops. These loops are Mind present within the physical universe.
Iron is a much better conductor of these spatial loops. Those measurable properties will thus adjust to the new pathway offered by the iron (least resistance), speed will increase, reluctance will decrease would be immediate obvious effects. So, if iron is brought into any part of the circulating spatial loop circuit, the portion of the circuit will have an easier path relative to the part of the overall spatial loop circuit. A differential reluctance will thus be created in different portions of the magnetic circuit because part of the flux is travelling through iron while another part of the same circuit is still travelling through air.
(From the image above, imagine the cardboard was replaced with a iron plate, this should improve the current carrying abilities of the copper wire).
This will divide the motion within the loop
as the magnetic circuit now comprises a portion as made up of iron
and a portion made up of the original air/spatial pathway.
This can have a beneficial effect because the wire can now carry a higher current. This effect implies that if the speed of the loop can be increased then more current is evident in the wire. An increase speed in one (magnetic, spiritual) plane increases the speed in the perpendicular physical plane.
TIP:
If the spatial loop were contained completely in an iron circuit, then the wire could be made to carry its maximum capacity !
Man CANNOT achieve this at present, because he fails to sufficiently accelerate the surrounding loops. Any
method which can increase the centripetal motion within a loop will enable a wire to carry a much higher current than at present.
|
Toroidal coils are a way of harnessing the entire magnetic loop within an environment of least resistance.
Can you 'see' the issues which prevents this particular design from harnessing of the entire magnetic flux ?
What about a typical solenoid type coil ?
How much of the loop field is captured here by this wiring direction ?
|
Consideration #9
Magnetism/Magnetic Fields
'electric current that doesn't shock' - george mamouzellos :)
We know that the magnetic loops surrounding a current carrying wire rotate in a specific direction. When that wire is bent into a coiled ring, the magnetic loops don't change their rotational direction although they seem to. Consider the following images.
Fig : 12 indicates that when a current carrying wire is bent into a loop there appears to be a change in direction of the rotational path. The left side appears to rotate in a CW manner while the right side appears to rotate in an ACW manner. We know that this
(CW/ACW) is the wrong approach to illusions of perspective. We are simply observing the top of a magnetic loops on the left side but the bottom of the SAME loop on the right side. The direction of rotation is unchanged !
However, there is an effect which is not an illusion. Figs : 12a/b show that the magnetic loops on each (L/R) side interact like two gears meshing to create an enhanced field path. The magnetic loops do not blend and meld, rather they behave in a similar way to pushing two balloon surfaces together, they flatten their contact surfaces.
These loop interactions effectively restrict the central aperture of the wire, and as a consequence the field flow increases.
Fig : 12c highlights how the field lines have to distort to fit through the series of spiral wire loops. We also know that iron is a better conductor of magnetic current and so, when an iron core is placed inside the spiral of coils the magnetic flux increases as does the electric current in the wire itself.
(fig : 12e)
If one wishes to create an electric current, one must ensure the loops of force surrounding the design are aligned face to face to facilitate clutch interaction. This will create fast centripetal inward motion. It will shock and kill.
If one wishes to create a magnetic current, one must ensure the loops of force are distorted in such a way as to bring the fields into direct edge on contact. The fields will interact like two meshed gears. This electric field will not shock or kill but will create the effect we call magnetism.
|
Consideration #10
Know your geometry & loop orientation
We know from our observation with a typical CRT that the loops align themselves face to face. There is no obvious edge/edge or
rim/rim interactions between those loops. We also know that the loops and polarity are one and that the loops align themselves perpendicular to the N/S axis.
Fig : 11a indicates that the surrounding loop is aligned in a similar way to the CRT with the direction of the N/S axis.
But, a close examination of fig : 11b which includes the electric wiring necessary to produce these N/S poles at the extremities of the core. As you know, there are no cores used in a CRT design, and man tends to wind the electric wire in the exact position of the loop orientation favoured by Nature. By doing this, notice how the loops produced around the wire are now perpendicular to that chosen by Nature.
Be aware ! When WR talks about loops of force there are two possible meanings.
|
 | When an electric current flows along a straight wire, loops of force appear parallel.
When the wire is bent into a loop, these loops become distorted, appearing pinched on the inside while appearing opened/fanned towards the outside.
We know that a focal center emerges at the hub of any circle, and these loops now appear to be aligned with that hub like spokes on a wheel.
|
Notice, how by bending the wire the geometrical relationship of the once parallel loops is changed. WR introduces this ALTERNATE mechanism for generation of heat and density (at the hub of WIRE loop) arising as a result of the proximity of the half the loops on the inside arc with respect to the parting/fanning of the loops on the outside radius. This is an entirely different mechanism from the iris contraction/expansion type mechanism discussed thus far.
Remember, up until now, heating was achieved by the loops of force contracting, closing their central holes !
There are two different mechanisms at play here !
TBC.