Cosmology of Walter Russell
Wave2
 |  | ||
 |
|
 | |
 |  |
"Within SPHINCTER motion lies ALL of WRC"
Pulsing Thought-Bodies induce contractions 90° to the impulse !
| | ||
|
|
| |
| |
I will be deviating slightly from the implications of the various models proposed by WRC, though in general I will remain faithful to the overall principles of WRC.
Let's begin with the 2D spinning/turning Thought-bodies of Mind Thinking. The 'motion' of these Thought-bodies is the only motion of the universe, though a simulated motion is projected to reproduce in 3D physical form the 2D Ideas. These 2D Thought-bodies are embedded in the fulcrum, the spiritual home of perceived motion. The properties of this 2D realm is described on the Novice_Source page.
|
Image 1
|
Image 2
|
Image 3
|
Image 4
|
Whatever way we decide to depict an expression of a half cycle, the other half of the cycle must ALWAYS be hidden on the inside of the same expression, no exceptions. Image 2 is expressing red to the outside and blue to the inside. As motion crosses the zero plane, expression reverses, turning inside-out so that in the next cycle the blue expression is on the outside with red on the inside. The images are fine to a point, however, does not conform to expressing herself utilising static xyz axes.
DO NOT confuse this statement with the idea that the fulcrum does not move. You need to be very clear at this point what WR means by seemingly contradictory statements.
| | ||
|
|
| |
| |
Notice, how in image 4, the red is projected to the outside between two blue 'outside' wave field expressions. In other words, alternate Thought-bodies will project in reverse. WRC goes into quite some detail explaining cubic wave fields, projections and reflections, which is not necessary at this point. Knowing images 1 - 4 will give you enough of an insight for the moment.
Motions within wave fields do not trespass into their neighbours, though it appears to our sensing that they do. This is just an illusion of sequencing. In image 4 there appears to be a left/right continuum between wave fields, but that is a false inference. Light does not travel with a leading edge. The propagation with a leading edge is merely a 'trick of sequencing' between neighbouring wave fields reflecting in reverse. The trick is convincing because Mind activates its alternate Thought-bodies at a rate of 186,624 miles/sec. Some quick thinking !
 |  | ||
 |
|
 | |
 |  |
Pay really close attention to the oscillating motion of images 2 & 3. This type of vibrational motion is exactly analogous to a vibrating guitar string. Think of a simple standing wave, displacing first above the axis, returning to zero, then displacing in the opposite direction.
Notice how, when ANY motion crosses the zero inert plane, it effectively turns inside out. This turning inside-out and outside-in is a sequential motion for that wave field expression.
| | ||
|
|
| |
| |
The cone of polarity is an important model to understand. It accounts for all of the curved potential existent between the anode/cathode. Nature though, expresses her polarised universe as a flattened cone.
Pay close attention to the 'movable' fulcrum ! The potential distribution across that fulcrum is now obvious.
|
Fig : 6
|
Fig : 7
|
Fig : 8
|
How would such a radial model be represented in the standard xyz format ?
| | ||
|
|
| |
| |
Ok, let's cut to the chase.
- the anode and the cathode must be present simultaneously. If observe in the direction of the anode we perceive matter and form, while observing towards the cathode we perceive gases, and nebulous space.
- this is a two-way universe of motion. The anode will centrifugally expand to become space, BUT, the cathode will compress to become the anode. The opposed motions cause friction as the try to pass each other. That resistive friction is high in towards the anode where the opposed channels of electrical strain are close together. This friction is registered to our sensing as heat, light, density and form. Where the channels are more open towards the cathode the frictional forces are less and thus we perceive such opposed motion as cold, dark, nebulous space.
Fig : 10
Heat and cooling have a SIMULTANEOUS SYMBIOTIC relationship. One cannot have one without the other.
As the spherical anode expands, it will charge/heat in the direction of the cathode and discharge/cool in its wake, towards the hub.
Pay very close attention here ! When we breathe inwards to compress to a sphere, we manifest that sphere at the end of the in-breath. In the image above that sphere is already present !! There are TWO separate processes going on here. If we look at the in breathing from cone base to sphere ONLY for a moment, then a breathing cycle may be represented as follows.
|
Fig : 11
|
Fig : 12
|
The motion in Fig : 11 appears left to right as time is accumulated during the completion of the cycle. The red represents compression, inhaling, while the blue represents expansion or exhaling. This is a linear expression of the breathing cycle. The same cycle could also be expressed in Fig : 12. Just be aware, Fig : 12 is sequential. It first generates to the right, then decays to the left.
Figures 11/12 only describe half of the cycle. As a cone base is compressing to a sphere, the ALREADY ( fig : 9) manifested sphere begins unwinding to become a cathode.
|
Fig : 13
|
Fig : 14
|
Fig : 15
|
Fig : 16
|
In terms of a radial, flatten cone model, Fig : 13 indicates the central +4 axis which acts as the focal point for the generation cycle. This axis is also the rotational axis of the body.
Fig : 14 also includes the +4 boundary. All physical matter manifests between these two +4 boundary conditions.
Fig : 15 now includes the zero (x) axis, from which all projections will emanate. The birthing axis. The area from the rim -> zero axis should be considered as the spiritual/cubic wave field/negative body of the physical manifestation.
The area from the zero axis -> hub is where the physical body will manifest. It will generate to live and radiate to decay in this area.
Fig : 16 is another way of indicating the zero (x) or death axis. The axis for birth and the axis for death is the same zero axis. It is a 2D expression. When the radiative emanations of an expanding sphere meets with the compressing spiritual 'self' on the zero axis, the death cycle begins. The image has no physical existence in the 3D realm. The 2D realm is 90° offset from the 3D realm.
Back to the chase...
the following images indicate all the degrees of motion necessary to understand the expansion/contraction with the wave cycle.
Fig : 17
Fig : 17 represents the collection of expanded light and compressing that light into a small volume to create the illusion of density and form. That form once created will then unwind back to stillness by radiating all the accumulated potential via equatorial expansion.
Don't lose sight of the fact that there is always some radiation evident during the compression cycle.
|
Fig : 18
|
Fig : 19
|
Fig : 18 and Fig : 19 essentially represent the same idea, that is, the continuous nature of the cycle. Compressed bodies want to expand and expanded bodies want to compress. Cycle 1 and 3 are identical, but they run in opposite directions. To avoid some directional issues examine the following (Fig : 20) alternate way to represent Fig : 18.
Fig : 20
Fig : 20 is a linear representation of Fig : 18. When reviewing the drawings of WR bear this linear concept in mind.
When the opposed motion is aligned as indicated in the following images then the reproduction principle is revealed.
Fig : 21 represents the union of opposed streams. That reproduced body then unwinds as indicated in Fig : 22. The rings of Saturn are a perfect example of expansion >> compression. The planet body is unwinding to return to the body of space.
Fig : 23 represents the conditions for union in reverse. The number 3 is analogous to cycle 1.
Fig : 25 indicates the continuous loops of generation and radiation. Each cycle becoming the other cycle in reverse.
| | ||
|
|
| |
| |
Imagine Light threads hanging parallel to one another so that they demonstrate the condition of zero motion as indicated in Fig : 27.
 Fig : 27
|  Fig : 28
|
Fig : 29
|
Fig : 30
|
A division is about to be introduced in this parallel environment. An in-breath will now be taken by an expression of the life principle thus causing that expression to charge, simultaneously discharging the environment. When the expression in (fig : 28) is charged by that in-breath the potential distribution of the environment is disturbed and is curved as indicated in (fig : 29).
The principle indicated (fig : 29) is simple but its effect is enormous, because this curvature extends to INFINITY.
It is felt everywhere.
Everything is connected to every other thing in this way.
Every in-breath taken by YOU in echoed across the entire universe, because YOU are the universe !
When matter breathes out, then that curvature is reversed as indicated in (fig : 30).
Now, because this is a two-way universe of motion we need to consider the opposite stream.
|
Fig : 31
|
Fig : 32
|
Notice, how the DIRECTION of the male in-breath is the same as the DIRECTION of the female out-breath. The out-breath of female is NOT male, though the direction is the same.
Likewise, the out-breath of male runs in the same DIRECTION as the in-breath of female, but male out-breath is NOT female.
Moving swiftly along to the process of division. WR uses the analogy of two tanks joined such that one tank can be pressurised at the expense of the other, to create a potential difference between the two tanks which will result in work being done as that air pressure differential is released. I will endeavour to use the same principle but steer away from the idea of using air. The problem with using an air analogy is that it introduces an evacuated condition into one tank which then might be applied to thinking of space as a vacuum, which it is not !
Imagine instead that the two tanks are simply filled with light. Nature does not take light from one condition and add it to the other as was demonstrated with the air tanks above. Nature introduces division by changing the volume only !
Fig : 33
When 10 light units (LU) are distributed over a unit area of space then one half of the zero inert gas condition is manifested. Although the inert gas condition is divided into two, those two halves are completely balanced and as such little or no work can be extracted from that state of motion. The reason for the inertness of the inert gases becomes apparent. WR describes this condition in terms of dark violet
To create the +4 condition, Nature will expand the area on one side 16 times and simultaneously reduce the other side 16 times. The light units remain the same on each side. what those same light manifest depends on the volume those units are free to move. When that volume is very restricted such as is present at the anode then tension are high and hot, incandescent, electro-positive conditions are manifested. This is the situation created when the 10 light units are compressed into 1/16th the original inert gas volume.
The 'same' light units when free to disperse over an area 16 times greater than the inert gas manifests as a cold, dark, electro-negative environment. This is Nature's seesaw. The balancing fulcrum is much closer to the compressed anode condition in order to balance the extended lever of the larger volume. The lights are the same on each side of the divide, but when those light units are distributed over a much larger area, then their wavelengths lengthen and the colour shifts to the red side of the spectrum.
10 light units compressed into a tiny volume will thus increase their frequency and shorten their wavelengths into the blue, UV and beyond range.
Notice, how Nature constructs her seesaw. the highly compressed are is tucked inside the expanse of cold light. It is this cold light envelope that locks the incandescent center in place preventing it from exploding outwards.
The other locked potential positions would be balanced as follows,
0 = 10 light units distributed over (1 area ) + (1 area) Volume = 1
+1 = 10 light units distributed over (1/2 area) + (2 x area) Volume = 8
+2 = 10 light units distributed over (1/4 area) + (4 x area) Volume = 64
+3 = 10 light units distributed over ( 1/8 area) + (8 x area) Volume = 512
+4 = 10 light units distributed over ( 1/16 area) + (16 x area) Volume = 4096
Can you 'see' how there really isn't two forms of light, rather there appears to be two because of how we perceive the
compression/expansion of those light units !
Now, if we simply reverse this +4 condition by compressing the expanded side, and expanding the compressed side we will in fact arrive at the same condition !!
In order for Nature to introduce an apparent opposite condition which is NOT the same she reverses that +4 condition and expresses the condition inside out.
| | ||
|
|
| |
| |